Clover Flex 4
A handheld POS with a built-in printer and LTE — takes the payment wherever the customer is.
- Handheld, with a printer
- Works away from Wi-Fi
- Swipe, dip, tap and wallets
- Barcode scanning
- Wireless charging cradle included
- Accessibility support
What this device is for.
Flex 4 is a handheld that does not need a counter. It has its own thermal printer, its own 4G LTE connection and a rechargeable battery, so it works at the table, in the queue, on the kerb or on a service call — and runs the same Clover software as the stations back at base.
It ships with a wireless charging cradle, so between rounds it sits somewhere obvious and charges without being plugged in.
What it does, straight.
- Handheld, with a printer A full receipt printer in a device that fits in one hand.
- Works away from Wi-Fi 4G LTE built in, with dual-band Wi-Fi when it is in range.
- Swipe, dip, tap and wallets Credit and debit, plus NFC payments including Apple Pay and Google Pay.
- Barcode scanning A dedicated scan button and a 5 MP camera reading 1D and 2D codes.
- Wireless charging cradle included Drops onto the cradle between uses rather than being plugged in.
- Accessibility support Passive stylus, physical PIN entry aid, headphone jack and voice assistant support.
What is actually in the box.
Only what the Product Library holds for this device. A line that is not listed here has not been confirmed, and is worth asking about rather than assuming.
System
- Processor
- Qualcomm 64-bit Arm Cortex-A53 quad-core, up to 2.0 GHz
- Memory
- 4 GB
- Storage
- 64 GB
- Operating system
- Android 13, multi-language
- Security processor
- Cortex M33 at 160 MHz
Display
- Screen
- 5.99-inch IPS LCD, 1440 x 720, 350 nits, capacitive multi-touch
Card acceptance
- Magnetic stripe
- 3-track, bi-directional, 600K swipes
- Chip card
- ISO 7816, 500K inserts
- Contactless
- EMVCo L1 and L2 contact and contactless
- PIN entry
- Virtual keypad
Compliance
- Security certification
- PCI PTS 6.x
- Payment certification
- EMV Contact L1 & L2, EMV Contactless L1 3.1, Mastercard TQM, Visa qVSDC, Mastercard Contactless, American Express ExpressPay, Discover DPAS, JCB Contactless, UPI Overseas, Interac Flash
Printer
- Receipt printer
- Thermal line dot with paper-out sensor, 48 mm print width, 58 mm roll
Connectivity
- Cellular
- 4G LTE in all regions, micro SIM
- Wi-Fi
- 802.11 a/b/g/n/ac 1x1, 2.4 GHz and 5 GHz
- Bluetooth
- Bluetooth 5.0
- Ports
- USB Type-C, USB 2.0 High Speed OTG
Camera
- Camera
- 5 MP with a dedicated barcode scan button; 1D and 2D scanning
Power
- Battery
- Lithium-Ion 16.6 Wh, 2190 mAh, rechargeable
- Charging
- Wireless charging cradle included; AC 100-240V, DC 12V/2A
Physical
- Dimensions
- 7.3 in x 3.2 in x 2.1 in (186.6 x 82.5 x 54.8 mm), without sleeve
- Weight
- 480 g (1.1 lb) without sleeve; 540 g (1.2 lb) with sleeve
- Ingress protection
- IPX4 water, IP5X dust
The paperwork, before you ask for it.
Published specification sheets and guides for this device. Each opens in a new tab, and the size is shown before you commit to the download.
The rooms this one is usually chosen for.
-
Pay at the table
The bill goes to the guest instead of the card going to the till.
-
Service calls and deliveries
A printer and a mobile connection in the same hand.
-
Queue busting
A second payment point opened anywhere in the room for the busy hour.
Other equipment on the same account.
-
Clover Flex Pocket
The lightest handheld Clover makes — same screen as the Flex 4, no printer, and a much bigger battery.
View details
-
Dejavoo P3
An Android wireless terminal with a 5-inch screen, 4G and a removable battery — payment that leaves the counter.
View details
-
Dejavoo P8
The largest Dejavoo handheld: a 6.5-inch Gorilla Glass screen, 8-core processor and an optional Zebra scanner.
View details
Not sure this is the one?
Say what the room is and what happens around the payment. That narrows it to two options faster than a specification sheet does.